Tube Beader
EARL'S patented EZ (ROLLER) BEADER is a fresh approach to an
old problem. In order to securely attach rubber water hose to rigid aluminum tubing the end of the tubing must be beaded.
Generations of racing mechanics have used military surplus Parker beading tools to do the job. We probably sold more of them
than anyone. Unfortunately production ceased after WWII and the surplus kits have been scarce for over a decade. Compact enough
to be used on already installed tubing Earl's EZ-BEADER produces a properly positioned and perfectly radiused bead on aluminum
tubing with wall thicknesses from .035" to .065". This is one tool that no serious racing mechanic can afford to be without.
|
|
| Buy Now |
|
|
| Buy Now |
|
Earl's Hose End Wrenchs
These wrenchs are specifically designed for use with Earl's fittings and
hose ends. The short handles allow usage in cramped areas and discourages overtightening. Color coded for quick
size identification. reduces damage to aluminum.
|
Plastic Caps & Plugs
Earl's plastic caps and plugs are the perfect
companion to the performance mechanic. They are great for plugging fittings when hoses are disconnected and for keeping debris
from entering hoses when they are being stored.
|
|
| Buy Now |
|
|
| Buy Now |
|
Earl's is proud to offer the state of the art in plumbing hardware for
professionals and serious enthusiasts. Crafted from 6061 T6 billet aluminum alloy these clamps are the finest available to
finish off a professional plumbing installation. For separating isolating and securing fuel lines brake lines & brake
hoses. Earl's has the wides selection available to finish off your engine compartment.
|
|
| Buy Now |
|
|
| Buy Now |
Polished Wire Separator
Earl's is proud to offer the state-of-the-art in plumbing hardware
for professionals and serious enthusiasts. Crafted from 6061-T6 billet aluminum alloy these clamps are the finest available
to finish off a professional plumbing installation. Earl's has the widest selection available to finish off your engine
compartment.
|
Econ-O-Fit Hose Clamp
Econ-O-Fit is the original anodized aluminum hose clamp cover. It's appearance
dresses up any installation. Econ-O-Fit's specially designed interior grooving prevents the hose from "hanging up" on the
clamp and ensures proper placement of the worn gear type clamp with respect to the end of the hose.
|
|
| Buy Now |
|
|
| Buy Now |
Red Aluminum
Machine Clamp
Earl's is proud
to offer the state-of-the-art in plumbing hardware for professionals and serious enthusiasts. Crafted from 6061T6 billet aluminum
alloy these clamps are the finest available to finish off a professional plumbing installation. For separating isolating and
securing fuel lines brake lines & brake hoses. Earl's has the widest selection available to finish off your engine compartment.
|
|
| Buy Now |
|
Aluminum
Cushioned Tubing Clamp
Earl's is proud to offer the state-of-the-art in plumbing hardware for professionals and serious enthusiasts. Crafted
from 6061T6 billet aluminum alloy these clamps are the finest available to finish off a professional plumbing installation.
For separating isolating and securing fuel lines brake lines & brake hoses. Earl's has the wides selection available to
finish off your engine compartment.
|
Conical
Seals
Immediate and
permanent field repairs for damaged hose end and 37° adapter fitting cones and seats are now available from Earl's. Assortment
includes sizes -3, -4, -6, -8, -10, -12, -16
|
|
| Buy Now |
|
|
| Buy Now |
|
'Buna N & Viton O-Ring
EARL'S stocks “O” ring seals in both the traditional BUNA N synthetic rubber and in VITON. The BUNA compound
is compatible with most fuels, hydraulic fluids, and lubricants up to a temperature limit of 275°F. VITON is preferred for
synthetic lubricants, oxygen bearing fuels and additives, and non–ether based brake fluids. VITON also has more scuff
resistance, a longer service life, and a higher temperature rating of 400°F.
|
Crush Washer
To be used with straight threaded adapter fittings when sealing at
a port which has no relief for an O-ring. Banjo adapters must be installed with sealing washers on both sides of the adapter.
The sealing washers must match the inside diameter of the adapter. The old sealing washers should not be reused. Earls offers
aluminum sealing crush washers in hole diameters 3/8", 10mm and 7/16."
|
|
| Buy Now |
|
|
| Buy Now |
|
Stat-O-Seal Washer
The Stat-O-Seal is very simply the best sealing washer available. It consists of a synthetic rubber O-ring mechanically
locked to the I.D. of an aluminum washer. When tightened the O-ring is compressed forcing the sealing surfaces around the
bolt shank. They will form a positive seal over a temperature range of 85° to +450° F. They provide the advantages of an O-ring
type seal without the necessity of machining O-ring grooves into the part. In any application where you are now using a copper
or aluminum sealing washer the Stat-O-Seal will do a better job.
|
Dowty Seal Washer
Standard practice
in the U.S.A. is to use crush washers O-rings and/or Stat-O-Seals to seal ports and banjo fittings. English practice is to
use Dowty Seals. Dowty seals are similar in concept to our Stat-O-Seals but are considerably smaller in diameter (and thicker
in cross section). Since many of our road racing and Indy cars and their mechanics are of English origin Earl's offers a complete
range of Dowty Seals.
|
|
| Buy Now |
|
|
| Buy Now |
|
Teflon Tape
Every time
you install a tapered pipe threaded fitting, it is essential to use some form of anti–seize to prevent galling. Our
Teflon Tape is not only the easiest and least messy for or anti–seize available, but it also forms a positive seal.
Teflon Tape, 1/2in x 520in
|
